7
1
1. Hardware Setup
Getting to know your router
If you have not already set up your new router using the installation guide that comes in the box,
this chapter walks you through the hardware setup. Chapter 2, Getting Started with NETGEAR
Genie, explains how to set up your Internet connection.
This chapter contains the following sections:
• Unpack Your Router
• Hardware Features
• Position Your Router
• Cable Your Router
• Verify the Cabling
For information about ReadySHARE features in your product, see Chapter 5, USB Storage and
www.netgear.com/readyshare.
For more information about the topics covered in this manual, visit the Sup
port website at
http://support.netgear.com.
To Next Page
Loading...
Need help?
General
