Advanced Settings
71
N300 Wireless Gigabit Router WNR3500Lv2
Advanced Wireless Settings
Select Advanced > Advanced Setup > Wireless Settings to display the following screen:
The following settings are available in this screen:
Enable Wireless Router Radio. You
can completely turn off the wireless portion of the
wireless router by clearing this check box. Select this check box again to enable the wireless
portion of the router. When the wireless radio is disabled, other members of your household
can use the router by connecting their computers to the router with an Ethernet cable.
Note: The Fragmentation Length, CTS/RTS Threshold, and Preamble
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
Turn off wireless signal by schedule. You can use this feature to turn off the wireless signal
from your router at times when you do not need a wireless connection. For instance, you
could turn it off for the weekend if you leave town.
WPS Settings.You can ad
d WPS devices to your network.
Wireless Card Access List. Click the Set Up
Access List button to display the Wireless
Card Access List screen. On this screen you can restrict access to your network to specific
devices based on their MAC address.
To Next Page
Loading...
Need help?
General
