18
2
2. Using NETGEAR genie
This chapter explains how to install NETGEAR genie and use it to manage your Powerline
network. NETGEAR genie works with all Powerline devices.
You can use NETGEAR genie to manage a local Powerline device that is connected to your
computer with an Ethernet cable and also to manage other Powerline devices on the same
network.
This chapter includes the following sections:
• Install NETGEAR genie
• Powerline Map
• View the Link Rate Between Powerline Devices
• Change the Name of a Powerline Device
• Turn LEDs Off or On
• Set the Powerline Encryption Key
• Reset a Device to Factory Default Settings
• Add a Device to the Powerline Network
To Next Page
Loading...
Need help?
General