To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the NETGEAR XS728T and is the answer not in the manual?
General| Model | XS728T |
|---|---|
| Ports | 28 |
| 10GBase-T Ports | 24 |
| SFP+ Ports | 4 |
| Switching Capacity | 560 Gbps |
| Form Factor | Rack-mountable |
| Layer | Layer 3 |
| Management | Yes |
| Weight | 18.5 lbs |
| Total Number of Network Ports | 28 |
| Uplink Port | Yes |
| Ethernet Technology | 10 Gigabit Ethernet |
| Number of Total Expansion Slots | 4 |
| Number of SFP+ Slots | 4 |
| Manageable | Yes |
| Width | 440 mm |
| Forwarding Rate | 417 Mpps |
| Power Supply | Internal |
| MAC Address Table Size | 32K |
| Jumbo Frame Support | Yes |
| Humidity | 10% to 90% non-condensing |
| Product Type | Switch |
| Media Type Supported | Twisted Pair, Optical Fiber |
| Layer Supported | Layer 3 |
| Power Source | AC |
| Height | 43.2 mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Latency (10G) | 1.5 μs |
