Getting Started
14
Powerline 500 WiFi Access Point (XWN5001)
The following screen displays:
8. Enter the following wireless settings:
• Wireless Netw
ork Name (SSID)
• Wireless
Security Type
• Passphrase
If you want to clone your existing
wireless network, enter the same wireless settings that
your router or gateway uses.
If you want to create a new WiFi network, enter n
ew wireless settings. Creating a new
WiFi network lets you have a second network in another zone of your house.
9. Click Apply
to save your changes.
10. Wh
en you are finished with the wireless settings, disconnect the Ethernet cable from the
XWN5001.
Note: You can access advanced wireless settings by right-clicking the
device icon and selecting the IP address on the pop-up menu. The
login and password are admin and password.
To Next Page
Loading...
Need help?
General
