Netio 230C - Page 28

Control and configuration
23
system sntp
Lists the settings of the SNTP client.
system sntp <enable|disable> <sntp_ip|domain>
SNTP client settings. Enables, or disables time synchronisation with the SNTP server. The address
of the server can be entered as an IP address, or domain name.
system time <YYYY/MM/DD,HH:MM:SS>
Local time settings.
system time
Lists the local time in the format YYYY/MM/DD,HH:MM:SS.
system timezone <+|-offset>
Local time zone settings. Time offset is given in seconds.
system timezone
Lists the time offset from UTC for local time. The value is listed in seconds.
system reset
Reset device to factory settings. After posting this command, the factory setting is restored and
the system restarts.
system webport <port>
Sets the device web port.
system webport
Lists the device web port. The default value is 80.
system kshport <port>
Sets the kshell interface port.
system kshport
Lists the kshell interface port. The default value is 1234.
system dhcp
Lists the DHCP client parameter settings.
system dhcp hostname <enable|disable<
Enables posting of device name to DHCP server.
system dhcp sntp <enable|disable>
Enables setting of the SNTP server according to the address set on the DHCP server.