EasyManuals Logo

Netis WF2414 User Manual

Netis WF2414
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
150Mbps/300Mbps Wireless-N AP / Repeater / Router client User Manual
29
Ø Default Gateway: The IP address of Default gateway you obtained after connect to the
Internet, if you haven’t connected to Internet yet, this field is 0.0.0.0.
Ø Primary DNS: The DNS server translates domain or website names into IP address, input
the most common DNS server address you used or provided by your ISP.
Ø Secondary DNS: Input IP address of a backup DNS server or you can leave this field blank
Ø Link Status: Show the current status of link information. You can choose connect or
disconnect by manually.
4.1.3. LAN
This item provides information about routers LAN port, display LAN port’s physical address,
IP address and current situation of DHCP server.
Figure 4-3
4.1.4. Wireless
This item provides current running information of wireless.
Figure 4-4
Ø Wireless status: Display wireless interface status is enabled or not
Ø Name (SSID): SSID (Service Set Identifier) is your wireless network's name shared
among all points in a wireless network.
Ø Mode: Current wireless mode of wireless router
Ø Channel: Display current channel of your wireless router.
Ø MAC Address: The MAC address is used for wireless communication
Ø WPS Status: Display WPS (Wi-Fi Protected Setup) status is enabled or not.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Netis WF2414 and is the answer not in the manual?

Netis WF2414 Specifications

General IconGeneral
BrandNetis
ModelWF2414
CategoryWireless Router
LanguageEnglish

Related product manuals