4.8.4. Domain Filtering
Figure 4-45
Ø Status: the default is disable. “DNS filter” is able to filter certain domain name such as
www.sina.com.
Ø Rule: you can select permit or deny. The default is permit.
Ø DNS Filter Key words: Input website name or Domain name in the “DNS Key Words”
field, such as www.163.com.
Follow these steps to set DNS filter:
1. You can select “enable” and click “Save” to enable “DNS Filter” function. This is only the
first step, you should continued to create appropriate rules for “DNS Filter”.
2. Input DNS Filter Key words.
3. There are two items supplied, “Permit through the router for DNS Key words listed, others
are denied” and “Deny through the router for DNS Key words listed, others are permitted”,
Select the item you want, and click “Save” button.
4. If you want to delete certain item on the list, select appropriate item on the list, click “delete”
to delete it.
4.9. Static Routing
Most of broadband router and wireless router are using NAT mode, so this feature is designed
for most common network environment.
To Next Page
Loading...
Need help?
General
