34
SunConnect SunNet Manager 2.0 (SNM)
Installing the MIB controllers on the NMS :
Copy the MIB to a directory specified by key-word na.snmp.schemas in directory / usr / snm /
snm / conf. Usually, it is / usr / snm / agents.
Perform mib2schema on MIB. This will create corresponding files xxx.mib.oid,
xxx.mib.schema and xxx.mib.traps.
In the box of SNM control panel select File/Load. Click on xxx.mib.schema and click on Load.
Activate the new shell box. Go to directory / usv / snm / agents and perform build_oid. Finally,
open xxx.mib.traps to the file specified by the key-word na.snmp-trap.default in directory / usr
/ snm / snm.conf. Usually, it is / var / adm / snm / snmp.traps. Now, SNM will understand
error reports from Network Adapter.
Connecting the Network Adapter Object to Management Map :
There are three ways how to connect it :
connect it to submap, where there is an associate controller for Network Adapter
connect it to subview from an associate controller and it will take the state of a
controller
connect it to cloud or to an independent browsing from the controller. It is the place
where all controllers can be resident.
Write submap in which the controller will be placed. With the right button on the mouse select
Edit / Create / Component / lanbox. This will add a controller and Properties dialog box is
displayed. Write the name of Network Adapter so as it is in / etc / hosts or in the name of the
server.
Write SNMP RdCommunity
Write SNMP WrCommunity
Select the requested MIB. Choose a color for it. Finally, before you can use the above created
glyph, you must create an managed device view. Select relevant submap and with the first
mouse button select Edit / Create / view / subnet. Key in the view name. Now copy and paste
the glyph into the managed device view.
To Next Page
Loading...
