(6)
USB DONGLE AS VIRTUAL COM
USB COM Port Emulation
If you connect scanner to the Host via USB dongle, by scanning “USB COM Port Emulation”
will allow your device to receive data in the way as a serial port does.
USB HID-KBW
When scanner is connected to your device via USB cable , USB HID-KBW feature will be
enabled by default. Then scanner’s transmission will be simulated as USB key-board input.
It works on a Plug and Play basis and no driver is required.
USB COM Port Emulation
If you connect the scanner to your device via USB cable, by scanning “USB COM Port
Emulation” will allow your device to receive data in the way as a serial port does.
$USB#COM
USB Dongle as Virtual COM
%#IFSO$2
*USB HID-KBW
%#IFSO$3
USB COM PORT Emulation
To Next Page
Loading...
