Transmit Check Digit
EAN-8 is 8 digits in length with the last one as its check digit used to verify the integrity of the
data. The default mode opens “transmit EAN-8 Check Digit”. Users can scan the code below to
choose it.
00571 00570
Transmit EAN-8 Check Digit Do Not Transmit EAN-8 Check Digit
Add-On Code
An EAN-8 barcode can be augmented with a two-digit or five-digit add-on code to form a new
one. In the examples below, the part surrounded by blue dotted line is an EAN-8 barcode while
the part circled by red dotted line is add-on code. The default mode opens “Disable Add-on
Code”. Users can take “Add-On Code Setting” for reference.
EAN-13
00361
00360
Enable EAN-13* Disable EAN-13
Transmit Check Digit
EAN-13 is 13 digits in length with the last one as its check digit used to verify the integrity of the
data. The default mode opens “Transmit EAN-13 Check Digit”. Users can choose to send it or
not.
00461 00460
Transmit EAN-13 Check Digit* Do Not Transmit EAN-13 Check Digit
To Next Page
Loading...
Need help?
General
