Netum NT-1202G User Manual

NT-1202G V18.5.21
Quick Setup Guide
Get Started: Connect your PC and stand via the USB Cable .After plug it on your USB port, you can start to use it.
(US keyboard by default) If you use other type of keyboard , please refer to below "keyboard language type" to set the
keyboard language before use it.
If you want to do other configurations please refer to below programming barcodes.
Firmware Version:
Read below command barcode to check scanner firmware version.
2.4GWISX_20180514
Below programming barcodes are applied for version - 2.4GWISX_20180514
Barcode Programming
Netum barcode scanners are factory programmed for the most common terminal and communications settings. If you
need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next
to an option indicates the default setting.
Interface (Optional)
USB Interface USB -KBW
When you connect the scanner to the Host via a USB connection, you can enable the USB HID-KBW feature by scanning
the barcode below. It works on a Plug and Play basis and no driver is required.
USB Serial Port
If you connect scanner to the Host via a USB connection, the USB COM Port Emulation feature allows the Host to receive
data in the way as a serial port does.

Netum NT-1202G Specifications

General

Brand	Netum
Model	NT-1202G
Category	Barcode Reader
Language	English

Summary

Interface Options

USB Interface USB -KBW

Connect scanner to Host via USB, enable USB HID-KBW feature by scanning barcode.

USB Serial Port

Connect scanner to Host via USB, use USB COM Port Emulation feature.

Keyboard Language Setup

Set American Keyboard

Set American keyboard layout. This is the default setting.

Set Portugal Keyboard

Set Portugal keyboard layout.

Set French Keyboard

Set French keyboard layout.

Set Spanish Keyboard

Set Spanish keyboard layout.

Set Germany Keyboard

Set Germany keyboard layout.

Set Turkey Q Keyboard

Set Turkey Q keyboard layout.

Set Italy Keyboard

Set Italy keyboard layout.

Set UK Keyboard

Set UK keyboard layout.

Scan Mode Configuration

Trigger Mode

Enable manual trigger mode for the scanner.

Continuous Mode

Enable engine to scan/capture, decode and transmit continuously.

Auto Sense Mode

Enable scanner to enter auto sense mode.

Terminator Settings

None

Set no terminating character suffix.

CR&LF Terminator

Set CR & LF as terminating character suffix.

CR Terminator

Set Carriage Return (CR) as terminating character suffix.

TAB Terminator

Set Tab (TAB) as terminating character suffix.

Working Mode Operations

Offline Mode Activation

Activate offline mode for the scanner.

Clear Buffer Storage

Delete all data in the buffer memory.

Manual Data Upload

Manually upload data entries after reconnecting.

Summarise Upload Quantity

Summarise gross quantity of uploaded data entries.

Quit Offline Mode

Exit offline mode and reinitialise normal mode.

Factory Default Restoration

Factory Restore Procedure

Initiate the scanner's factory restore process.

Serial Port Configuration

Configure serial port settings for the scanner.

Set Baud Rate to 19200

Set the scanner's baud rate to 19200.

Set Enter+LF Terminator

Set Enter + Line Feed as the terminator.

Setting Communication Channel

Configure the scanner's communication channel.

Beep and Sleep Mode Settings

Disable Scanner Beep

Disable scanner beeping for successful scans.

Enable Scanner Beep

Enable scanner beeping for successful scans.

Enable Immediate Sleep

Enable immediate sleeping for the scanner.

Prohibit Scanner Sleep

Prevent the scanner from entering sleep mode.

Idle Time Configuration

Configure scanner idle time before sleeping.

Prefix, Suffix, and Data Format

Custom Prefix Setup

Set a custom prefix for scanned data.

Custom Suffix 1 Setup

Set a custom suffix 1 for scanned data.

Custom Suffix 2 Setup

Set a custom suffix 2 for scanned data.

Data Transmission Format Options

Configure formats for transmitting scanned data.

Appendix 1: Numeric Bar Codes

Numeric Bar Code 0

Scan barcode for numeric value 0.

Numeric Bar Code 1

Scan barcode for numeric value 1.

Numeric Bar Code 2

Scan barcode for numeric value 2.

Numeric Bar Code 3

Scan barcode for numeric value 3.

Numeric Bar Code 4

Scan barcode for numeric value 4.

Numeric Bar Code 5

Scan barcode for numeric value 5.

Numeric Bar Code 6

Scan barcode for numeric value 6.

Numeric Bar Code 7

Scan barcode for numeric value 7.

Numeric Bar Code 8

Scan barcode for numeric value 8.

Numeric Bar Code 9

Scan barcode for numeric value 9.

Keystroke and Functional Key Set

Enable Keystroke Function

Enable keystroke functionality for scanned values.

Enable Functional Key Set

Enable functional key set mapping for scanned values.

Common Barcode Symbologies

UPC-E Barcode Settings

Enable or disable UPC-E barcode scanning.

EAN-8 Barcode Settings

Enable or disable EAN-8 barcode scanning.

EAN-13 Barcode Settings

Enable or disable EAN-13 barcode scanning.

Bookland EAN (ISBN) Settings

Enable or disable Bookland EAN (ISBN) barcode scanning.

UPC/EAN Supplementals

Configure how UPC/EAN barcodes with supplementals are read.

Barcode Symbology Enable/Disable

Code 128 Settings

Enable or disable Code 128 barcode scanning.

Code 39 Settings

Enable or disable Code 39 barcode scanning.

Code 39 Full ASCII Settings

Enable or disable Code 39 Full ASCII barcode scanning.

Additional Barcode Symbologies

Code 93 Settings

Enable or disable Code 93 barcode scanning.

Code 11 Settings

Enable or disable Code 11 barcode scanning.

Interleaved 2 of 5 Settings

Enable or disable Interleaved 2 of 5 barcode scanning.

Matrix 25 Settings

Enable or disable Matrix 25 barcode scanning.

Codabar Settings

Enable or disable Codabar barcode scanning.

MSI Settings

Enable or disable MSI barcode scanning.

GS1 DataBar and Other Symbologies

GS1 DataBar-14 Settings

Enable or disable GS1 DataBar-14 barcode scanning.

GS1 DataBar Limited Settings

Enable or disable GS1 DataBar Limited barcode scanning.

GS1 DataBar Expanded Settings

Enable or disable GS1 DataBar Expanded barcode scanning.

PDF417 Settings

Enable or disable PDF417 barcode scanning.

QR Code Settings

Enable or disable QR Code barcode scanning.

Data Matrix (DM) Settings

Enable or disable Data Matrix (DM) barcode scanning.

Appendix 2: ASCII Code Mappings

ASCII Code 39 Encode Char Mappings (0-X)

Table mapping scan values to ASCII Code 39 encode characters and keystrokes.

ASCII Code 39 Encode Char Mappings (Y-7)

Table mapping scan values to ASCII Code 39 encode characters and keystrokes.

ASCII Code 39 Encode Char Mappings (8-V)

Table mapping scan values to ASCII Code 39 encode characters and keystrokes.

ASCII Code 39 Encode Char Mappings (W-u)

Table mapping scan values to ASCII Code 39 encode characters and keystrokes.

ASCII Code 39 Encode Char Mappings (v-Undefined)

Table mapping scan values to ASCII Code 39 encode characters and keystrokes.

Support and Contact Information

Product Support Inquiry

Contact information for product inquiries and support.

Company Contact Details

Provides the company's telephone, email, and address.