Operations Manual Model 1100
Manual Part Number:
C5-06-4900-01-0
Manual File Name:
MN-A-0004
Manual Revision Level: E
ECO: 9760
7. Emergency and First-Aid Procedures
Eye Contact: Immediately flush with water for at least 15 minutes.
Inhalation: Expose to fresh air, inhalation unlikely.
Ingestion: Call a physician; take large amounts of water.
Skin Contact: Immediately flush skin with plenty of water for 15 minutes.
8. Handling
Wear respiratory, rubber gloves, and eye protection
Protective measures during cell replacement:
• Do not remove sensor from shipping container until ready to install
• Inspect the sensor for leakage before removal from shipping package. If it is leaking, do not
remove from package.
• Put on gloves and eye protection when replacing sensor
Note: The above data is based on MSDS provided by the manufacturers of components and by tests
conducted by Neutronics. Neutronics believes that this information to be accurate and reliable. This
information is supplied as reference only. Neutronics disclaims any liability for damage or injury which
results from the use of the data and nothing contained therein shall constitute a guarantee, warranty, or
merchantability or representation by Neutronics with respect to the data, the product described, or their use
for any specific purpose, even if that purpose is known to Neutronics.
To Next Page
Loading...