5.7 Appendix H – Warranty
LIMITED W
A
RR
A
NTY
Because of the many and varied circumstances and conditions under which NEUTRONICS, INC.'s products
are used, and because NEUTRONICS, INC. has no control over this actual use, NEUTRONICS, INC.
makes no warranties which extend beyond the express provisions herein. NEUTRONICS, INC. MAKES NO
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. NEUTRONICS, INC. makes no express
warranties beyond the following provisions, which only apply to the original purchaser.
NEUTRONICS, INC. only warrants to the original purchaser as follows: When the products and their
component parts are properly installed and maintained in accordance with the published NEUTRONICS,
INC. manuals, and i
f the product has not been modified or tampered with, then only the products actually
manufactured by NEUTRONICS, INC. shall be warranted to be free from defects in material and
workmanship for a period of one year from shipment by NEUTRONICS, INC., except NEUTRONICS,
INC. sensors which shall be free of said defects for a period of time from date of shipment as specified in the
NEUTRONICS INC. technical specifications for that specific sensor.
The original manufacturers' warranties apply to products and components not manufactured by
NEUTRONICS, INC.
NON-ASSIGNABILITY OF WARRANTY
The warranty as set forth in these terms and conditions may not be assigned, transferred, sold, or
alienated in any other way and extends only to the original purchaser.
PURCHASER’S EXCLUSIVE REMEDY
The original purchaser's sole and exclusive remedy, unless varied by written agreement with
NEUTRONICS, INC., is
that NEUTRONICS, INC. will, at NEUTRONICS, INC.'s option, repair or replace
any defective part which is returned to NEUTRONICS, INC. within ninety (90) days of discovery of the
defect.
DISCLAIMER OF CONSEQUENTIAL DAMAGES
In no event shall NEUTRONICS, INC. be liable for consequential damages, including but not limited to
damages for loss of use, damages for lost profits, and damages for resulting harm to property other than the
NEUTRONICS, INC. assemblies and their component parts.
Intended Use for the Model 1100
The model 1100 Oxygen analyzer was designed to provide the trained operator with useful information
relating to the concentration of Oxygen. This information may be used in process control or to minimize
possible hazardous conditions, which may be present in various processes. Before implementation, the user
must fully understand the operation and limitations of this instrument as well as the application for its use.
The responsibility for the proper application, operation, installation, and maintenance of the model 1100
Oxygen analyzer is the sole obligation of the trained operator. The purchaser is required to ensure operators
are properly trained in the use of this unit as well as in the possible hazards associated with its use or with
the intended application. The purchaser must ensure that all of the proper warnings, labels, instruction
manuals, lock outs, redundant components, hazard analysis, and system validation have been completed
and provided to the trained operator before implementation of the model 1100 instrument.
To Previous Page
Loading...