Nevco MPCX2 - FACTORY AND DEFAULT SETTINGS

6
FACTORY SETTINGS
Segment Timer Project
The Segment timer MPC-X is preprogrammed with a full segment timer project from the factory. Following is
the project settings:
Scoreboard Settings
The scoreboard settings preprogrammed into the control are the brightness setting and the scoreboard model
type setting.
 Display Brightness is set to bright
 Scoreboard model type is set to type A (Indoor)
Auto Horn Enabled
on all segments
Time Status OFF
Auto Advance Enabled
on all segments
40 Total Segments
(the maximum amount)
All Segment time
is 5:00
Segment Set to
Segment 1