EasyManua.ls Logo

Nevco MPCX2 - Allows You to Check Signal Strength When Connected to a Receiver

Nevco MPCX2
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Allows you to set the direction the timer will count.
Note: In baseball the Time Up/Down control is in the At Bat / Time
button.
Allows you to select the Brightness Level of the
scoreboard. (High or Low)
Allows you to enable or disable the automatic horn. (Sounds for about 4
seconds when time has expired).
Note: In baseball the Auto Horn control is in the At Bat / Time button.
Turns the control OFF and blanks all scoreboard functions except Time.
Uses the displayed time as the set time if it is a valid Time Of Day.
Otherwise blanks the entire scoreboard.
Note: Not all scoreboard models support Time Of Day and thus not all
controllers will display Time of Day.
Reports the condition of the batteries in the control.
Note: “Low Battery!!!” Will display when it is approaching time to
change batteries. When 0 bars of battery life are left the batteries must
be replaced immediately.
Allows you to check signal strength when connected to a receiver.
Used as an indication of reliability of communications.
Affected by distance, battery condition, obstructions and signal
interference.
Auto Horn
(+)On (-)Off
Brightness
(+)HIGH (-)LOW
Set Time of Day
Press (+)
Time Up/Down
(+)Up (-)Down
Signal Strength
L>>>>>>>>>>>>H
Battery Level
L>>>>>>>>>>>>H

Other manuals for Nevco MPCX2

Related product manuals