Page 18
Options
Fader Pack Option
The optional fader pack provides 16 Input faders with post fade direct outputs plus
mutes and 2 Master faders. The Input faders have a range of ∞dB to +15 dB. The
master faders have a range of ∞dB to 0dB.
With the fader pack fitted, the rotary channel level control of the 8816 becomes an
aux send level control with a range of ∞dB to +15dB. This can be used to send
channels to a reverb or other FX unit.
Recall of the faders and mutes can be stored using USB and the Recall application
so that they can be included into the multi unit Recall system provided on the 88
outboard range.
NOTE: Internal jumper settings must be changed to enable the optional fader pack to
take control of the main mix level. See section on Jumper settings.
When the fader option is not fitted, the jumper sets the Aux output level to –3dBu.
When the fader option is fitted, the jumper sets the Aux output level to 0dBu
To Next Page
