SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION
2–140
10. Driveline
In this sub-menu the operator can set following items:
• Tyre radius
• Rear wheel assist
• Dual range (Only if rear wheel assist is installed)
• Tracks type
• Autopilot type
NOTE: The other items in this sub-menu are factory
set and should not be changed.
• Tyre radius
To change, proceed as follows:
1. Select item “Tyre radius”.
2. To change the value of the tyre radius, using the
“+” and “–” navigation keys and press enter to
store.
NOTE: The number of the tyre radius can be find in
the listed below.
249
Tyre radius
Traction Tyre Tyre radius value
620/75R34-170A8-DT820 0.859 m
650/75R32-172A8-DT822 0.863 m
710/70R34-178A8-MegaXBib 0.897 m
800/65R32-172A8-DT822 0.864 m
800/65R32-172A8-XM28 0.869 m
900/60R32-176A8-DT830 0.919 m
900/60R32-176A8-MegaXbib 0.893 m
900/65R32-172A8-TD8 0.956 m
1050/50R32-178A8 MegaXBib 0.899 m
18.4R42–153A8–RAT23 (duals) 0.881 m
20.8R42–155A8–RAT23 (duals) 0.922 m
420/80R46-159A8-RAT23 (duals) 0.889 m
Tracks 0.352 m
To Next Page
Loading...
Need help?
General
