ChipSHOUTER Users Manual: Specifications
17
Specifications
General Specifications
Power supply (ChipSHOUTER DC Input) ... 19V DC ±10%, 3.4A
Power consumption (standby) ........... 0.4W Typical
Power consumption (armed) ............. 5W Typical
Power consumption (charging/pulsing) .. 5W to 50W Typical
Power supply (AC-DC adapter) .......... 100–240VAC, 50/60Hz, 1.5A
Size (ChipSHOUTER main unit) .......... 130 x 55 x 25 mm
Weight (ChipSHOUTER main unit) ........ 180 g
Altitude
Operating......................... 2000 m
Storage........................... 12 000 m
Storage Temperature ................... -40°C to 60°C
Operating Temperature ................. 5°C to 40°C
Relative Humidity ..................... Noncondensing
0 % to 80 % @ 5°C to 30°C
Decreasing linearly to 50 % @ 40°C
Safety
EN 61010-1:2010 .................. Pollution Degree 2
Electromagnetic Compatibility
International .................... EN 61326-1: Portable Electromagnetic
Environment; EN 61326-2-2 CISPR 11: Group 2, Class A
Group 2: This equipment intentionally generates RF
energy that is used in electromagnetic coupling, in-
ductive coupling, and capacitive coupling for
material analysis or inspection.
Class A: This equipment is suitable for use in all
establishments other than domestic and those directly
connected to the public low voltage power supply net-
work that supplies buildings used for domestic
purposes.
There may be potential difficulties in ensuring elec-
tromagnetic compatibility in other environments due
to conducted and radiated disturbances.
Emissions that exceed the levels required by CISPR 11
can occur when the equipment is connected to a test
object. The equipment may not meet the immunity re-
quirements of this standard when test leads and/or
test probes are connected.
To Next Page
Loading...