ChipSHOUTER Users Manual: Safety Information
7
from the ChipSHOUTER by unplugging the power
source. Check connections are secure and for dam-
age to the probe. If probe is damaged destroy and
discard it, and replace with an undamaged probe.
• IF you notice smoke or unusual odors emitted from
the ChipSHOUTER, immediately discontinue opera-
tion and remove power from the ChipSHOUTER by
unplugging the power source. Store the device
where it cannot accidently be used, and contact
us for repair or replacement information.
• DO NOT operate the product with the air inlet
cover removed without connecting an air hose. If
an air hose is removed immediately replace the
air inlet cover.
• Repairs must only be performed by an approved
technician.
• DO NOT expose the ChipSHOUTER to water or other
liquids, DO NOT submerge the ChipSHOUTER in water
or any liquid, and do not use ChipSHOUTER as a
bath toy under ANY circumstances.
• Keep ChipSHOUTER away from children and especial-
ly smart dogs.
• DO NOT use ChipSHOUTER or any accessories if they
appear damaged in any way, paying careful atten-
tion to the insulation on the injection tips.
• CAREFULLY READ the high voltage warnings section.
• Familiarize yourself with the warning and label
pictures from the table below.
To Next Page
Loading...