Newport LDC-3706 Series - Page 71

December 2019 59 LDC-3706 Series Laser Controller
NAME FUNCTION INSTrument
OUTPut[1][:STATe] <nrf>
Set output state of currently
selected instrument.
LAS, TEC
OUTPut[1][:STATe]?
Reports output state of currently
selected instrument mode.
LAS, TEC
OUTPut2[:STATe] <nrf>
Enable or disable external fan
control.
TEC
OUTPut2[:STATe]? Report external fan output state. TEC
PID:AUTOtune
Starts or stops the auto-tune
process.
TEC
PID:AUTOtune? Report if auto-tune is in process. TEC
PID:PRESET <string> Sets a PID preset for a mount. TEC
PID:PRESET:LIST? Report list of PID presets. TEC
SENSor <string> Set the temperature sensor type. TEC
SENSor?
Report the currently selected
temperature sensor type.
TEC
SENSor:ICI:SETpoint <nrf> Set current setpoint for IC sensor. TEC
SENSor:ICI:SETpoint?
Report current setpoint for IC
sensor.
TEC
SENSor:ICI:LIMit:LOW <nrf>
Set low current limit for IC
sensor.
TEC
SENSor:ICI:LIMit:LOW?
Report low current limit for IC
sensor.
TEC
SENSor:ICI:LIMit:HIGH <nrf>
Set high current limit for IC
sensor.
TEC
SENSor:ICI:LIMit:HIGH?
Report high current limit for IC
sensor.
TEC
SENSor:ICV:SETpoint <nrf> Set voltage setpoint for IC sensor. TEC
SENSor:ICV:SETpoint?
Report voltage setpoint for IC
sensor.
TEC
SENSor:ICV:LIMit:LOW <nrf>
Set low voltage limit for IC
sensor.
TEC
SENSor:ICV:LIMit:LOW?
Report low voltage limit for IC
sensor.
TEC
SENSor:ICV:LIMit:HIGH <nrf>
Set high voltage limit for IC
sensor.
TEC
SENSor:ICV:LIMit:HIGH?
Report high voltage limit for IC
sensor.
TEC
SOURce[1]:AM[:STATE] <nrf> Enable or disable LDI modulation. LAS
SOURce[1]:AM[:STATE]?
Report currently selected LDI
modulation state.
LAS
SOURce[1]:CURRent:LIMit:HIGH <nrf> Set upper TEC current limit. TEC
SOURce[1]:CURRent:LIMit:HIGH? Report upper TEC current limit. TEC