Software
37
Now, the main screen will become available.
Figure 12 Main screen
The top portion of the main screen shows position information for the selected
controller. The position information can be shown in user defined units or micro-
steps by clicking on the button next to the position text box. Also, in the top
portion, the means to select a Controller (with up/down arrows) is provided.
Users can provide custom identification names for their controllers.
NOTE
Note that user can select one Controller at any given time to communicate to; also,
the “Stop Motion” and “Motor ON” buttons correspond to the selected Controller.
Position
text box
To Next Page
Loading...
