Software
39
The next tab is the View All tab. In this screen all the active Controllers on the
RS485 network are shown.
Figure 13 View all Tab Screen
The Move tab enables the user to move the actuator. There are three ways to
move the actuator.
1. Jog – Jog is a mouse driven bar that moves the
actuator with a specific speed proportional to the
mouse location in both positive and negative
directions as long as the mouse is clicked.
2. Absolute Move – “Move to”, moves the actuator to
the user specified position.
3. Relative Move – “Increment”, moves the actuator by
the user specified position increment.
4. Home - clicking on this button will initiate “home
search” algorithm.
To Next Page
Loading...
