Newport NewStep NSA12 - Page 7

Preface
7
3.1 Unpacking and Handling................................................................. 21
3.2 Inspection for Damage .................................................................... 21
3.3 Parts List.......................................................................................... 21
3.4 Choosing and Preparing Work Surface ........................................... 22
3.5 Electrical Requirements................................................................... 22
3.6 Operating Temperature.................................................................... 22
4 Operating NewStep 23
4.1 Overview......................................................................................... 23
4.1.1 Operation Modes............................................................................. 23
4.1.2 User Controls................................................................................... 24
4.1.3 Single Actuator, no Computer Interface (minimal configuration)... 25
4.1.4 Single Actuator with Computer Interface........................................ 26
4.1.5 Two Actuators, no Computer Interface ........................................... 27
4.1.6 Two Actuators with Computer Interface......................................... 28
4.1.7 Multiple Actuators with Computer Interface................................... 29
4.2 Operation Modes............................................................................. 30
4.3 User Controls................................................................................... 30
5 Software 33
5.1 Overview......................................................................................... 33
5.2 Software Installation........................................................................ 33
5.3 RS-232 Communication Requirements........................................... 33
5.4 Using NewStep-Util ........................................................................ 34
6 NewStep Controller ASCII Command Set 43
6.1 Command Summary........................................................................ 43
6.1.1 Summary Table ............................................................................... 43
7 Maintenance & Service 75
7.1 Enclosure Cleaning.......................................................................... 75
7.2 Technical Support............................................................................ 75
7.3 Service Form ................................................................................... 77