Newport XPS-D - Tuning - Auto-Tuning

XPS-D Controller Start-Up Manual
2.6 Rear Panel Description
Figure 8: Rear panel of XPS Controller/Driver.
NOTE
The Main Power ON/OFF Switch is located next to the inlet for the power cord.
The switch and the inlet must be accessible to the user.
2.6.1 Axis Connectors (AXIS 1 – AXIS 8)
Each installed axis driver card features a connector to attach a cable (supplied with
every Newport stage) between the controller and a motion device.
Figure 9: Axis driver card.
Please see the next section for installation instructions.
9 EDH0395En1031 – 09/18