XPS-D Controller Start-Up Manual
This procedure is for the Windows 7 operating system (almost similar process for
Windows 8):
• Start Button > Control Panel > Network and Sharing Center => Change adapter
settings.
• Right Click on Local Area Connection Icon and select Properties.
• Highlight Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
• Verify Obtain an IP address automatically is selected and click "OK".
HOST Connection:
• Proceed the same way but select “Use the following IP address” in the previous
screenshot.
• Type “IP address: 192.168.0.100” and “Subnet mask: 255.255.255.0” for example
(assuming the HOST IP address is still at the original value 192.168.0.254) and click
"OK".
EDH0395En1031 – 09/18 18
To Next Page
Loading...
