XPS-D Controller Start-Up Manual
Procedure for connecting to the controller:
• Open an Internet Browser and connect to http://192.168.0.254
in case using HOST
connector or connect to http://192.168.254.254 in case using REMOTE connector
Login:
Name: Administrator
Password: Administrator (Please see the picture below).
Role: Administrator
NOTE
Please note that the login text is case sensitive.
Once logged in, the XPS has established a direct connection to the local computer.
The user interface is fully described in XPS-D User Interface manual.
If you don’t want to connect the XPS controller through a Corporate Network you may
skip to section 3.7: “Connecting the Stages“.
NOTE
If you want to change the HOST IP address of the XPS controller, follow the
explanation in the next section. It is necessary to keep using the gray cross-over
Ethernet cable to connect the XPS controller directly to the PC.
19 EDH0395En1031 – 09/18
To Next Page
Loading...
