XPS-D Controller Start-Up Manual
If you want to recover a lost IP configuration, you need to connect the PC directly to the
REMOTE connector at the back of the XPS with the gray cross-over cable.
Figure 18: Direct connection to the XPS
using a cross-over cable and the REMOTE connector.
First, the IP address on the PC’s Ethernet card must be set to Obtain IP Address
Automatically.
• Open Internet Browser and connect to http://192.168.254.254
Login:
Name: Administrator
Password: Administrator (Please see the picture below).
Rights: Administrator
NOTE
Please note that the login text is case sensitive.
EDH0395En1031 – 09/18 24
To Next Page
Loading...
