EasyManua.ls Logo

Nexcom PEAK650VL2B - Page 39

Nexcom PEAK650VL2B
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Peak 650 User's Guide Rev. A October 2000
BIOS Setup
4-23
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will be shut off.
The Choice: Enabled, Disabled.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all
other devices remain active.
The Choice: Enabled, Disabled.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state when the
system has ung
The Choice: Delay 4 Sec, Instant-Off.
Wake-Up by PCI card
When enabled, you can ake-up
your system using a PCI rev2.2 card, when a ME#
event occurring.
The Choice: Enabled, Disabled.
PowerOn by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem)
awakens the system from a soft off state.
The choice: Enabled, Disabled.
USB KB Wake-Up From S3
This item will enable you to wake-up the system by USB keyboard when you shut down the computer in S3
mode.
The choice: Enabled, Disabled.
Resume by Alarm
When Enabled, your can set the date and time at which the RTC (real-time clock) alarm awakens the
system from Suspend mode.
The choice: Enabled, Disabled.

Related product manuals