- Product Specifications
USB-Link™ 2 Wi-Fi Edition Installation and Setup Manual 7
Product Specifications
The USB-Link™ 2 is configured with the following specifications:
Feature
Data
Physical Dimensions 6.75" x 3.75" x 1.06"
(171 mm x 95 mm x 27 mm)
Weight
8 oz. (0.22 kg)
Power Requirements 6 - 32 VDC @ 350 mA maximum
Operating Temperature
0 to +70 °C
API Driver TMC RP1210A, RP1210B, and RP1210C
compliant
SAE J2534 compliant
Vehicle Protocols Supported • J1708/J1587
• J1939 (250K, 500K, or 1 MB)
• CAN (125K, 250K, 500K, 1 MB)
(3 CAN channels supported)
• J2284 CAN (125K, 250K, or 500K)
• ATEC-160 Baud
• ALDL Pass-through
• ALDL 8192
• ALDL 9600
•OBDII
• ISO 9141
• ISO 14230 (KWP2000)
• ISO 15765
• J1850 (PWM, VPM, or Allison)
• J1939 Auto Baud
• IESCAN (required for Allison)
USB Communication USB Device, version 1.1
Wireless Communication
Dual band Wi-Fi (802.11 a/b/g/n)
Wired Communication Automotive A to Mini-B USB cable 13 ft.
(4 m) maximum
Vehicle Connector
High Density D-sub 26-pin Male (HD26M)
USB Connector Latching Mini-B
To Next Page
Loading...