NEXIQ Technologies USB-Link 2 - Step 1: Install the Drivers

- Step 1: Install the Drivers
USB-Link™ 2 Wi-Fi Edition Installation and Setup Manual 15
Step 1: Install the Drivers
Prior to using the USB-Link™ 2, you have to install the necessary USB-Link™ 2
drivers. The USB-Link™ 2 drivers are compatible with both Microsoft
®
Windows
®
7 and Windows
®
8.
IMPORTANT:
ä Remember, you must have Administrator security rights and be logged in
as “Admin” to successfully complete the installation process outlined in
this manual.
The following procedure assumes that you have Internet access.
To install the drivers on your laptop or PC:
1 On your laptop or PC, navigate to the following website:
www.nexiq.com/downloads
Figure 3.1 NEXIQ™ Downloads
2 From the USB-Link 2 Drivers section, select the latest version of the USB-Link
2 drivers.
3 Carefully read the End User License Agreement.
4 Scroll down to the bottom of the page and click on Accept.