NEXIQ Technologies USB-Link 2 - USB-Link 2 Explorer Usage and Menus

32 USB-Link™ 2 Wi-Fi Edition Installation and Setup Manual
Chapter 3 • Installing the Drivers and Setting Up the Device
Using the USB-Link™ 2 Explorer
The USB-Link™ 2 Explorer utility opened automatically when you installed the
USB-Link™ 2 drivers and utilities (see Figure 3.9, on page 23).
To re-open the USB-Link™ 2 Explorer once
it has bee
n closed, click on the Show
Hidden Icons arrow in your PC’s System Tray.
Figure 3.16 Hidden Icons
Then, double-click on the USB-Link™ 2 icon .
NOTE:
i You can also access the USB-Link™ 2 Explorer from your PC’s Start
menu. Click Start and then select All Programs

NEXIQ

USB-Link 2

USB-Link 2 Explorer.