3 Time
This setting allows you to set the Time manually, if required during initial setup.
Note:
- The time will be overwritten when there is a subsequent satellite connection.
4 Date
This setting allows you to set the Date manually, if required during initial setup.
Note:
- The date will be overwritten when there is a subsequent satellite connection.
5 Time Zone
The Time and Date are automatically set from the satellite signal, but can be adjusted
dependent upon your Time Zone or whether Daylight Savings Time is operational.
6 Country
Select your current Country, this will then automatically adjust the Time Zone / DST
setting to your Time Zone, i.e. if France is selected the Time Zone will become GMT +1.
If your required Country is not available, select ‘Other’. This will take you to the
‘Time Zone’ menu, from there you can manually select your Time Zone.
Options: United Kingdom, Belgium, Denmark, Finland, France, Germany, Italy,
Netherlands, Norway, Poland, Spain, Sweden and Other
Default Setting: United Kingdom
7 Speed Units
Select whether to record and display speed in KMH or MPH.
Options: MPH and KMH
Default Setting: MPH
8 Sounds
Turn Off / On the device sounds, these will cancel the notification Sounds and
also the Startup & Shutdown chimes.
Options: On and Off
Default Setting: On
Cam Viewer - Dash Cam Settings (contd.)
9 Announcements
Turn Off / On the spoken announcements, these are heard when there is no SD card inserted
or the SD card has an error and needs to be formatted using the Dash Cam.
Options: On and Off
Default Setting: On
Note:
- Announcements are currently only available in English.
10 Language
Select preferred language for the spoken announcements.
Options: English, Danish, German, Spanish, French, Italian, Dutch, Norwegian, Finnish
and Swedish
Default Setting: English
11 Enable Wi-Fi on Startup
Once enabled the Dash Cam's Wi-Fi will turn on automatically when the Dash Cam starts up.
The Dash Cam’s Wi-Fi will be seen as an Access Point (hotspot) by your mobile device,
depending on the settings within your device it may automatically connect to the Dash Cam.
This may leave you without a cellular connection.
Options: On and Off
Default Setting: Off
Note:
- Depending on your mobile device a Cellular connection may not be available during
Wi-Fi connection to the Dash Cam, hence the recommended setting is off.
12 System Info
View system information such as Dash Cam Model, Firmware Version, and SD card details here.
13 Default Settings
Reset the Dash Cam to the default settings.
39
To Next Page
Loading...
Need help?
General
