NextBase Duo Cinema - Getting Started; Vehicle Installation Guide

EN-8
EN-9
Duo Cinema Instruction Manual
Geng Started
Installing Duo Cinema in Vehicle
Thisdeviceisspecicallydesignedtobemountedbehindthedriverand
passenger seats.
1 Remove the screws to release both locking latches on the stanchion mount.
2 Position the bracket on the bars of the headrest. Fasten the screws on both
lockinglatchestoxthebracketrmlyonthebars.
Note:
♦ Make sure the stanchion mount of the player is installed on the RIGHT headrest.
3 Connect the player and the monitor with the AV/Power cable (one end of the
car power cable) as shown in the following illustration.