34
SPECIFICATIONS
Amplifier
Output Power 20 watts per channel (20Hz to 20KHz).1%
THD all zones driven.
Input Sensitivity .750mV
Input Voltage (max.) 5V
Video
Input/Output Impedance: 75 ohms
Video Bandwidth: DC to 6Mhz.
Output Level: 1Vpp
Tuner
FM Section
Frequency Range: 87.5-108Mhz.
IHF Sensitivity: 20dBu (19Khz LPF On THD = 3%)
IF Rejection: 60db
Image Rejection: 30db
Usable Sensitivity: 25db (S/N = 20db)
Selectivity: 60db
Signal to Noise: 60db
Stereo Separation: 25db
AM Section
Frequency Range 530-1710Khz.
IF Rejection: 45db
Image Rejection: 30db
Sensitivity: 61 db
Selectivity: 18db (+/- 10Khz)
Signal to Noise: 43db
IR
IR Modulation Frequency Bandwidth: 38K-75K
Keypad IR Sensor Range: 30’
General
Source Inputs: 5 Audio and Video inputs in addition to the built-
in Tuner
Expansion: Up to 18 Zones using X-1 and X-2 Expansion
Controllers
RS-232: 9600 Baud, Asynchronous, 8Bits,No Parity, No
Handshake
12V Trigger Output: 12VDC @ 100mA
Power Requirements: 120VAC
Power Consumption: 650 Watts
Keypad Connections: 6 plug-in 4 terminal screw connectors
IR Outputs: 1 common; 5 source specific
Dimensions: 17”W x 3 7/8”H x 14”D (including feet and connectors)
Weight: 28 Lbs.
To Next Page
Loading...
