English NexusRace SW
2 Part specification
__________________________________________________________
Items delivered with the FDX kit
Qty. Description
1 USB to RS-232 converter
4 3 m 9-pole serial cable
2 Installation CD
1 Installation manual
The FDX kit comes with all NX2 Servers and contains cables and software to connect
your NX2 system to your PC. You may either use the Serial port (RS-232) or the USB
port using the USB to Serial-port converter.
NOTE: The FDX Server will use the standard NMEA protocol for communication with
all standard software’s. If the NX2 Sail Performance Software is used, a command is
send to change the protocol to FDX which enables you to control the whole NX2
system from your PC.
The NX2 Sail Performance Software will only work together with a FDX Server. An
FDX Server has the following label on the cover:
To Next Page
Loading...
