Nibe AG-WT10 - Operation Without Remote Control

Function without remote control
Function selector
If the remote control does not work or is missing, use the function selector
as follows:
Stationary climate unit
If you want to start the climate unit, press the function selector to select
the desired mode (COOL or HEAT).
NOTE
The climate unit starts with the fan at HIGH speed. The temperature is
set to 25 °C for the cooling mode and to 21 °C for heating.
Climate unit in operation.
If you want to stop the climate unit, press the function selector until the
unit switches to standby-mode (red function lamp).
AG-WT10Chapter 3 | Remote control16