5 Operating program
Air ioniser
Press the button (the symbol appears in the display) to activate
the air ioniser, which effectively prevents bad odours and eliminates bac-
teria and microorganisms.
NOTE
The device is only active if the inner fan is working.
Night program/energy saving
If the night program is selected, the climate unit automatically changes
the set temperature 60 minutes after selection. In this way, energy is saved
without risking the comfort of the premises. During the night program,
the fan speed is automatically reduced making it quieter.
1.
Press the button or to set the climate unit for cooling, dehu-
midifying or heating.
2.
Press the button. The symbol appears in the display.
3.
To exit the program, press again.
Temperature changeFunction mode
Reduces by 2 °CHeating
Increases by 1 °CCooling and dehumidifying
23AG-WT10Chapter 5 | Operating program
To Next Page
Loading...
