4 Function modes
Cooling
NOTE
Check that the unit is connected to the mains supply and that the func-
tion lamp is lit.
1.
Press button until the symbol for cooling ( ) appears on the
display.
2.
Press the +/- button (temperature selection) to set the desired temper-
ature (the setting range can be set between 10 °C and 32 °C).
The display indicates the selected temperature value.
Once five minutes have passed after setting the desired
temperature, the display resumes to showing the room
temperature.
3.
Press the button to set the fan speed.
17AG-WT10Chapter 4 | Function modes
To Next Page
Loading...
