Vacation timer
The "vacation timer" functions makes it possible to activate the indoor
unit, with a programmable delay of up to 99 days regarding the functions
of the daily timer, On-timer, Off-timer (does not apply to TIMER 1 HOUR)
as previously described in this manual. With this function it is possible to
program a climate unit restart after a public holiday, a vacation of one or
two weeks etc. This timer works as follows:
■
Start time:
After x number of days, the climate unit starts with the set values and
continues until another setting is made.
■
Stop time:
The climate unit runs according to settings in x number of days, it then
stops.
■
Daily timer:
First set times in ”daily timer”. After x number of days, the machine starts
and runs according to the timer settings each day until another setting
is made.
To activate the function, follow the steps below in order:
1.
Hold the button in on the remote control for at least 6 – 7
seconds. When the button is released, the menu for selecting the
number of days the delay is to apply for appears.
2.
Select desired timer (daily timer, start time, stop time) and press the
same button .
3.
Set the desired number of delayed days using ”+”.
4.
Hold the button in on the remote control again for at least 6 – 7
seconds. When the button is released, you are returned to the normal
menu on the remote control.
The icon for the desired timer now starts to flash and the corresponding
timer activates, according to the set number of days delay.
31AG-WT10Chapter 7 | Clock and timer
To Next Page
Loading...
