Dehumidification
1.
Press button until the symbol for dehumidifying ( ) appears on
the display.
2.
Press the +/- button (temperature selection) to set the desired temper-
ature (the setting range can be set between 10 °C and 32 °C).
The display indicates the selected temperature value.
Once five minutes have passed after setting the desired
temperature, the display resumes to showing the room
temperature.
■
When the room temperature is above the set value the heat pump
works automatically to dehumidify as effectively as possible.
■
When the room temperature is below the set value, the heat pump
still works at low power to continue dehumidification and can reduce
the room temperature in small spaces to 10 °C.
NOTE
■
Use the dehumidification function to reduce the air humidity in the
room.
■
When the room temperature reaches the set value, the climate unit
repeats on and off cycles in automatic mode.
■
In dehumidifying mode the fan speed is set automatically.
■
The defrosting function does not work at room temperatures below
10 °C.
21AG-WT10Chapter 4 | Function modes
To Next Page
Loading...
