EasyManua.ls Logo

Nibe AG-WT10 - Page 39

Nibe AG-WT10
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The climate unit does not cool or heat sufficiently
ActionPossible cause
Clean the filters.Dirty or blocked filter.
Remove or switch off other heat sources.Too high a temperature (further heat source or
too many people in the room).
Close doors and windows.Doors or windows are open.
Remove blockages to resume correct air circula-
tion.
The air flow is blocked by external object.
Change the set temperature on the remote
control.
Too high a temperature set on remote control.
Use another auxiliary heat source.Very low outdoor temperature.
Contact installer.The defrosting system on the outdoor unit dur-
ing heating does not work.
The climate unit emits a clicking noise
ActionPossible cause
Situation that must be deemed normal. The
clicking noise disappears when the temperature
stabilises.
During the function the plastic parts expand as
the temperature varies, which causes the un-
pleasant noise.
37AG-WT10Chapter 9 | Disturbances in comfort

Other manuals for Nibe AG-WT10

Related product manuals