Nibe F1245 Service Manual

Base card (AA2)
1 Remove the plastic cover
over (AA3. See page 53.
Cables
2 Disconnect the two cables
through the cover in front of
(AA2).
3 Remove the plastic cover
over (AA2).
Screw
4 Disconnect the cables and
screws holding the card in
position.
5 Remove the base card
(AA2).
F1245Chapter 7 | Component replacement66

Nibe F1245 Specifications

General

Refrigerant	R410A
Control System	NIBE SMO 40
Dimensions (HxWxD)	1800 x 600 x 620 mm
Energy Efficiency Class Heating 35°C	A++
Energy Efficiency Class Heating 55°C	A++
Heating Capacity	5-12 kW
COP Heating	4.5
Integrated Hot Water Tank	180 liters
Power Input Heating	1.0 - 3.0 kW