Need help?Do you have a question about the Nibe Fighter 1210 and is the answer not in the manual?
Concise overview of the FIGHTER 1210 and its setting table.
Explanation of how the heat pump extracts and transfers heat.
Description of the heat pump's front control panel, display, and indicator lamps.
Explanation of function keys, display modes, and setting operating modes.
General principles of indoor temperature control, map, heating, hot water, and standby.
Guidelines for safe handling, storage, and physical installation of the unit.
Collector data, installation inspection, electric boiler mode, and brine pump info.
Details on various on-display information like temperatures and settings.
Setting the heating curve, slope, and room compensation.
Setting flow temp limits, operating times, and safety parameters.
Configuration for brine system, pumps, calibration, and diagnostic procedures.
General installation requirements and collector circuit connection guidelines.
Connections for heating medium, water heater, ventilation recovery, and free cooling.
Charts showing pressure drop versus flow for different heat pump sizes.
General requirements for electrical hook-up and factory output settings.
Detailed wiring diagrams for 4 kW and 5-10 kW FIGHTER 1210 units.
Wiring diagrams for the CPU unit of the 4 kW and 5-10 kW models.
Steps for filling, venting, starting, and adjusting the system.
Using graphical diagrams to adjust heating curves and offsets.
Visual guides showing the location of internal components for different models.
A comprehensive catalog of all parts and their reference numbers.
Physical dimensions and installation layout coordinates for the unit.
Detailed technical data, performance parameters, and safety ratings.
Identification of included parts and optional accessories for the unit.
Guidance on diagnosing and resolving common operating issues and alarms.
Procedures for pump start, draining, and checking/replacing the sacrificial anode.
To Next Page
General
