Need help?Do you have a question about the Nibe FIGHTER 1330 and is the answer not in the manual?
General| Cooling Capacity | 11.5 kW |
|---|---|
| Power Output | 5 - 15 kW (depending on model) |
| Power Input Cooling | 3.1 kW |
| COP Heating | 4.2 |
| Sound Power Level Outdoor Unit | N/A (No outdoor unit) |
| Dimensions Outdoor Unit (HxWxD) | N/A (No outdoor unit) |
| Weight Outdoor Unit | N/A (No outdoor unit) |
Explains the fundamental working principle of the heat pump.
Instructions for the correct installation of the heat pump.
Specifics for connecting the heating medium circuits.
Details for connecting the brine circuit.
Procedure for filling and venting the collector system.
Procedure for filling the heating medium system.
Details on connecting external sensors to the unit.
Specifics on connecting power and control signals.
Step-by-step guide for initial inspection before operation.
Procedure for starting up a single heat pump unit.
Procedure for starting up a system with multiple heat pumps.
How to select the operating mode for each unit.
Detailed steps for configuring Master/Slave units.
Details on the heating mode, including operating modes.
Menu settings for hot water production.
Configuration and operation of the Extra Hot Water function.
Details on controlling the electrical additional heater.
Wiring diagrams for the electrical additional heater.
Description of how the oil boiler is controlled.
Details on the HPAC system for heating and cooling.
Description of the integrated floor drying function.
Information on connecting and using room control devices.
Control and connection of the hot water circulation pump.
Details on connecting and operating pool heating.
Control and connection of the groundwater pump.
Details on passive cooling using a 4-pipe system.
Details on passive cooling using a 2-pipe system.
Operation modes for combined cooling/heating with accumulators.
Wiring for external control of additional heat and compressor.
Instructions on how to change parameter values.
Detailed settings and status for heat pump modules.
Settings for external units and accessories.
Access to service-specific settings and diagnostics.
Detailed technical specifications for different models.
Troubleshooting steps for low room temperature.
Troubleshooting steps for high room temperature.
Troubleshooting for issues with hot water supply.
Alarms that reset automatically after conditions are met.
Troubleshooting communication errors between units.
Overview of constant alarms and their causes.
Troubleshooting high pressure alarms.
Troubleshooting low pressure alarms.
Troubleshooting motor cut-out alarms.
Troubleshooting level sensor alarms in the collector circuit.
To Next Page
