Description of functions - Expansion card 1
FIGHTER 1330
36
To connect the relays ETS-4 to ETS-6, see the section
Description of functions - Basic functions > Electrical
additional heater.
To connect HPAC on Expansion card 1 see the section
Description of functions - Basic functions > HPAC.
Electrical additional heater HPAC
LEK
10
NOTE!
Access to the following functions
requires the Expansion card 1 (10)
accessory with associated
terminal block X6A.
When this is connected the card
must be activated in menu 9.1.1.
X6A
To Next Page
Loading...
