Nibe FIGHTER 1330 - 7.0 Clock

Control
FIGHTER 1330
68
Menu 7.1 Date
The current date is set here.
Menu 7.2 Time
The current time is set here.
Menu 7.3.0 Temp set back time 1
Pressing the enter button takes you to sub-menus
for day changes period 1, where settings for night
reduction are located.
Menu 7.3.1 Temp set back time 1
Here you which heating system is to be influenced
by day changes period 1. When heating system 2
is installed both System 1 and 2 can be selected.
Can also be set to Off. The factory setting is Off.
Menu 7.3.2 Offset heating curve
Changes to the flow temperature with a day
change, e.g. the night reduction is set here. The
value is adjustable between -10 and +10. The fac-
tory setting is 0.
Menu 7.3.3–7.3.9 Set Time Monday–Sunday
The time for the day change, e.g. night reduction, is
chosen here.
Menu 7.3.10 Return
Pressing the enter button returns you to menu
7.3.0.
U
U
U
U
U
N
N
Menu 6.9.0 Room sensor
Shows the current temperature on the room sensor
(RG05 or RG10). Pressing the enter button takes
you to sub-menus with settings for the room sen-
sor. Only shown when the room unit or RG10 is
selected in menu 9.1.11.
Menu 6.9.1 Room balancing
Here you set the factor that determines how much
a deviation between the desired and true room
temperature shall affect the flow temperature. The
factor is adjustable between 0 and 6 in increments
of 0.1. The factory setting is 1.0.
Menu 6.9.2 Room balancingsystem
Here you select which heating system the room
sensor shall affect. Can be set to Off, Heating
syst1, Heating syst2 or Heating sys 1&2. The fac-
tory setting is Off.
Menu 6.9.3 Desired room temperature
The menu is only displayed if RG05 is selected in
menu 9.1.11. The value can be adjusted between
10 and 30 °C in increments of 0.5 °C. Factory set-
ting is 20 °C.
Menu 6.9.4 Return
Pressing the Enter button returns you to menu
6.9.0
Menu 6.10 Return
Pressing the Enter button returns you to menu 6.0.
U
U
U
U
N
7.0 Clock6.0 External units*
Normal menus: displayed in all menu modes.
Extended menus: Only displayed when extended
or service is selected in menu 8.1.1.
Service menus: Only displayed when service is
selected in menu 8.1.1.
U
S
N
U