Inspection of the installation
Current regulations require the heating installation to be inspected before it is commissioned. The inspection must be
carried out by a suitably qualified person. In addition, fill in the page for the installation data in the User Manual.
DateSignatureNotesDescription
Ventilation (page 19)
Outdoor air damper
Setting ventilation flow exhaust air
Setting the ventilation flow outdoor air
Connecting ground cables
Heating medium (page 17)
System flushed
System vented
Pressure in the climate system
Hot water (page 17)
Mixing valve
Expansion vessel
Tundish
Electricity (page 21)
Connections
Main voltage
Phase voltage
Fuses heat pump
Fuses property
Outside sensor
Room sensor
Safety breaker
Earth circuit-breaker
Miscellaneous
Benchmark checklist
NIBE S735Chapter 1 | Important information6
To Next Page
Loading...
