Nibe S735 - Accessories

Detailed information about the accessories and complete
accessories list available at nibe.co.uk.
Not all accessories are available on all markets.
SPLITTER KIT DKI S10
For split installation of S735.
Part no. 067 797
DOCKING KIT DEW S42
DEW S42 means that S735 can be connected to the water heater
VPB S200.
Part no. 067 796
DOCKING KIT DEW S43
DEW S43 means that S735 can be connected to the water heater
AHPH S/AHPS S.
Part no. 067 800
EXTRA SHUNT GROUP ECS
This accessory is used when S735 is installed in houses with two
or more different heating systems that require different supply
temperatures.
ECS 41 (approx.
80-250 m²)
Part no 067 288
ECS 40 (Max 80 m²)
Part no 067 287
HUMIDITY SENSOR HTS 40
This accessory is used to show and regulate humidity.
Part no. 067 538
ROOM UNIT RMU S40
The room unit is an accessory with a built-in room sensor, which
allows the control and monitoring of S735 to be carried out in a
different part of your home to where it is located.
Part no. 067 650
SOLAR PACKAGE NIBE PV
NIBE PV is a modular system comprising solar panels, assembly
parts and inverters, which is used to produce your own electricity.
ACCESSORY BOARD AXC 20
Accessory board for hot water circulation, damper for frost protec-
tion and/or external heating medium pump.
Part no. 067 609
SUPPLY AIR MODULE SAM
SAM is a supply air module specially developed for houses with
supply and exhaust air systems.
Select model based on the house supply air flow.
SAM S44
(approx. 42-125 l/s)
Part no. 067 795
SAM S42
(approx. 20-85 l/s)
Part no. 067 794
SUPPLY AIR MODULE DWS S42
DWS S42 is a supply air module with a 135 litre integrated water
heater, specially developed for houses with supply and exhaust
air systems.
Part no. 067 872
WIRELESS ACCESSORIES
It is possible to connect wireless accessories to S735, e.g. room,
humidity, CO
2
sensors.
For more information, as well as a complete list of all available
wireless accessories, see myuplink.com.
WATER HEATER
AHPH S
Accumulator tank without an
immersion heater with an in-
tegrated hot water coil
(stainless steel corrosion
protection).
Requires that the whole in-
stallation (S735 and AHPH S)
is positioned at a distance of
60 mm from the rear wall.
Requires docking kit.
Part no. 080 137
AHPS S
Accumulator tank without an
immersion heater with a solar
coil (copper corrosion protec-
tion) and a hot water coil
(stainless steel corrosion
protection).
Requires that the whole in-
stallation (S735 and AHPS S)
is positioned at a distance of
60 mm from the rear wall.
Requires docking kit.
Part no. 080 136
VPB S
Water heater without immersion heater with charging coil.
Requires docking kit.
VPB S300 R UK
Corrosion protection:
VPB S200 R UK
Corrosion protection:
Part no. 081 147StainlessPart no. 081 245Stainless
TOP CABINET TOC 40
Top cabinet, which conceals any pipes/ventilation ducts.
Height 345 mm
Part no. 089 757
Height 245 mm
Part no. 089 756
Height 385 - 635 mm
Part no. 089 758
Height 445 mm
Part no. 067 522
65Chapter 12 | AccessoriesNIBE S735
Accessories