EasyManua.ls Logo

Nibe S735 - Technical Specifications

Nibe S735
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specifications
7kW1x230 V
Output data according to EN 14 511
1.16 / 3.90kW/-Heating capacity (P
H
)/COP
1
1.57 / 5.19kW/-Heating capacity (P
H
)/COP
2
5.37 / 2.55kW/-Heating capacity (P
H
)/COP
3
SCOP according to EN 14 825
6kWRated heating output (P
designh
)
4.75 / 3.81SCOP cold climate, 35°C / 55 °C
4.50 / 3.67SCOP average climate, 35 °C / 55 °C
4.41 / 3.62SCOP warm climate, 35°C / 55°C
Additional power
3.5 (3.5)kWMax power, immersion heater (factory setting)
Energy rating, average climate
A+++ / A++The product’s efficiency class room heating, average climate 35 / 55 °C
4
A+++ / A++The system’s efficiency class room heating, average climate 35 / 55 °C
5
A / XLEfficiency class hot water heating/Declared tap profile
6
Electrical data
230 V ~ 50 HzVRated voltage
30.2AMax operating current
32AMin. fuse rating
75WDrive output heating medium pump
170WDriving power exhaust air fan
IP1XBEnclosure class
Equipment Compliant with IEC 61000-3-12
For Connection Design Purposes, Compliant with Class A limits of IEC 61000-3-2
For Connection Design Purposes, Compliant with IEC 61000-3-3 technical requirements
WLAN
11dBm2.412 - 2.484 GHz max power
Wireless units
4dBm2.405 - 2.480 GHz max power
Refrigerant circuit
R290Type of refrigerant
3GWP refrigerant
0.42kgVolume
0.00126tonCO
2
equivalent
Heating medium circuit
0.25 (2.5)MPa (bar)Max pressure in the heating medium circuit
0.25 (2.5)MPa (bar)Opening pressure, safety valve
0.2 / (2.0)MPa (bar)Operating pressure
70 (60)°CMax temperature, supply line (factory setting)
Ventilation
25l/sMin. airflow
Noise
40-53dB(A)Sound effect level according to EN 12 102 (L
W(A)
)
7
36-49dB(A)Sound pressure level in the installation room (L
P(A)
)
8
Pipe connections
22mmHeating medium ext Ø
22mmHot water ext Ø
22mmCold water ext Ø
125/160mmVentilation Ø
Water heater and heating section
7.8litreVolume coil
178litreVolume, hot water heater
0.65 / (6.5)MPa (bar)Max pressure in hot water heater
Tested according to EN 12897:2016
223 - 264litreTap volume 40°C (V
max
)
9
1.6 / (16)MPa (bar)Maximum water supply pressure
0.6 / (6.0)MPa (bar)Operating pressure, tap water
0.35 / (3.5)MPa (bar)Expansion vessel, tap water, precharge pressure
0.3 / (3.0)MPa (bar)Pressure reduction valve, setting
18litreVolume expansion vessel (external)
0.7 / (7.0)MPa (bar)Max operating pressure of T&P-valve
NIBE S735Chapter 13 | Technical data68

Other manuals for Nibe S735

Related product manuals